Design your own pattern: Herringbone, Double Herringbone, Basketweave, Mosaic, Bricks
N.B. advanced DIY-skills and tools needed. For best finish use (hire) professional sanding equipment, preferably with never-ending sanding-belt. For edges use professional edge-sander.
This product needs to be glued down on level under/subfloor (either concrete or chipboard or Industrial solid oak mosaic glued on concrete). When using subfloor make sure height differences are sanded down before installing pattern with the wood blocks.
Take your time to set out your pattern: first row is most important and will act as anchor for next rows. Give the first row sufficient time to bond with adhesive.
When installing pattern with border, complete pattern first and leave it for 10 - 12 hours. Cut excessive blocks with professional circular saw, remove excessive adhesive before installing strip and border. Again, give border sufficient time to bond with adhesive before sanding.
After installing the floor needs to be sanded properly.
1st Sanding with abrasive grit 40. 2nd Sanding with grit 80 and collect sand-dust. Mix sand-dust with woodfiller and 'plaster' on floor to cover all gaps.
3rd Sanding with grit 100 or 120 will remove excessive filler and will create smooth surface.
Apply finish product according to instructions on tin/can (for lacquer finish sand 4th time with grit 150).
N.B. Sanding mistakes will show after applying finish product
To calculate correct no of sq m needed, add 7 - 10 % for saw-waste.